Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Applications/Metallurgy
APPLICATIONS · METALLURGY

Slurry pumps for MetallurgyHot, alkaline and abrasive slurries: temperature and corrosion drive the material decision.

Metallurgical duties vary widely: red mud and spent liquor in alumina, granulated slag and slag flushing water in ironmaking, mill scale in rolling. Temperature and alkalinity change the material decision as much as wear does.

Duty characteristics, wear patterns, selection notes and common questions for this industry, with the matching series and wear parts.

High head slurry pump for metallurgical duty
Metallurgy
DUTY

Duty characteristics

SELECTION

Pump and material by duty

Common combinations; the final choice follows a duty calculation.

Duty conditionSelection and material
Hot slurryHigh-chrome or heat-resistant alloy; avoid standard rubber; provide seal cooling
Alkaline slurry (red mud)High-chrome alloy with alkaline-resistant seals; confirm rubber compound before use
Mill scale and oxideHard metal wetted parts; check vane thickness at the outlet
Slag flushing waterHigh flow, low head unit; check NPSH and piping layout
MATCHING RANGE

Recommended series and wear parts

Model pages list construction, code explanation and chart extracts; part pages list basic number and material.

FAQ

Metallurgy slurry pump questions

Why do shaft seals leak in metallurgical duty?

Heat and solids accelerate packing and sleeve wear, while mechanical seals can fail through crystallisation or temperature rise. Match the seal to the medium temperature and guarantee flush water or cooling.

What material for red mud?

Red mud is strongly alkaline with fine solids, so high-chrome wetted parts with alkaline-resistant seals are typical. Confirm the grade against temperature and concentration, and consider a coupon test.

Can rubber liners handle hot slurry?

Standard wear rubber does not. It hardens, ages and debonds above the compound limit, so metal parts are used instead.

Next step

Send the metallurgy duty parameters

Medium, concentration, particle size, flow and head are enough to propose a pump, a material and a spare-parts list. For a replacement, a nameplate photo confirms the part numbers.

Selection support for Metallurgy

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry