Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
SHIJIAZHUANG ZHONGQIAN PUMP INDUSTRY CO., LTD.

Slurry Pumps & Spare PartsPump selection and spare-part replacement, verified item by item against the model and part number

Thirteen pump series and twenty-seven wetted and seal parts. Each model carries its construction, code explanation and published performance data; each part its basic number, material and matching range.

AH series heavy duty slurry pumpAH SERIES · HEAVY DUTY
PRODUCT RANGE

Pump series and duties

Three groups by construction: horizontal heavy duty, vertical and submersible, and special duties, covering thirteen series. Representative models are listed here; full data appears on each model page.

01
Heavy duty horizontal

Heavy duty horizontal

HEAVY DUTY HORIZONTAL

Workhorses for ore dressing, coal washing, ash removal and tailings, at high solids and long distances.

View models →
02
Vertical & submersible

Vertical & submersible

VERTICAL & SUBMERSIBLE

Sump, pit and pond duties where the pump body runs submerged and needs no priming.

View models →
03
Special duty

Special duty

SPECIAL DUTY

Gravel and coarse solids, FGD limestone slurry, froth and shield-tunnelling mud.

View models →
MODEL INDEX

Model index and performance data

Values below are the first listed model of each series taken from the original charts, for range reference only. Other models of the same series are listed in the index.

SeriesModelCapacity Q m³/hHead H mSpeed r/min
AH1.5/1B-AH12.6–28.86–681200–3800Details →
2/1.5B-AH32.4–726–581200–3200Details →
HH1.5/1C-HH16.2–34.225–921400–2200Details →
3/2D-HH68.4–136.825–87850–1400Details →
ZJ50ZJ-I-A5057110.71480Details →
100ZJ-I-A3613049.51480Details →
DT40DT-B2016.657.52930Details →
150DT-A5062–2799.3–44.6490–980Details →
SYA / ZJE65ZJE-Ⅱ27.5–80.076.0–43.51480Details →
80ZJE-Ⅱ40.0–11576.0–43.51480Details →
Data excerpted from the supplied charts; final selection follows the technical documents.All 69 models →
SPARE PARTS

Spare parts and basic numbers

Impellers, liners, casings and shaft sleeves are organised by basic part number; the same basic number maps to different item numbers across frame sizes and can be checked against the nameplate.

147

Impeller

Sits in the pump chamber on the shaft end and forms the flow passage toget…

Mainly high-chrome wear alloy (A05
Details →
041

Frame Plate Liner

Fitted on the drive side of the casing behind the impeller; with the volut…

High-chrome wear alloy, rubber lin
Details →
075

Shaft Sleeve

Located in the seal chamber, passing through the stuffing box or mechanica…

Wear-resistant alloy, stainless or
Details →
078

Stuffing Box

On the drive side of the pump end around the shaft sleeve, assembled with …

Cast iron, cast steel or wear/corr
Details →
003

Bearing Frame

Between the pump end and the base, in horizontal split or cartridge form.

HT250 grey iron or QT500 ductile i
Details →
005

Bearing Assembly

Housed in the frame; consists of the shaft, bearings, bearing housing, sea…

Heavy rolling bearings (cylindrica
Details →
CONSTRUCTION & MATERIALS

Double casing and wetted materials

A slurry pump uses a double casing: the outer shell carries pressure while the inner liner and plates form the wetted passage, so wear parts are replaced without disturbing the casing or piping. High-chrome alloy and rubber are the two common routes, chosen by particle size and pH.

  • Wetted materialsHigh-chrome A05 for coarse, highly abrasive solids; rubber R for fine particles and corrosive media.
  • Shaft sealGland packing or expeller seal, chosen by suction pressure and whether dilution water is allowed.
  • Wear partsImpeller 147, Frame plate liner 041, Front liner 083, Volute liner 110, Shaft sleeve 075 are standard wear parts.
  • VerificationChecked against the nameplate model and basic part number rather than appearance alone.
Assembly shop
Assembly area — pumps and spares checked on the same line
TECHNICAL DOCUMENTS

Technical documents online

Original charts and manuals are rendered as web pages and can be read without downloading; wording follows the source files, with paragraph and punctuation tidying only.

CONTACT

Contact

For pump selection send medium, flow, head and site conditions; for parts send the pump model, nameplate photo or basic part number.

18803212220
Email sale@pumpq.com
Address Shijiazhuang, Hebei — plant and warehouse at one site
WeChat QR code
WeChat · 18803212220
WhatsApp QR code
WhatsApp · 18803212220
Click outside or press Esc to close
☎Call✉Email⇄Inquiry