The ZJ is the most common slurry pump family in Chinese mining, coal preparation and power plants: axial suction, single stage, double casing with high-chrome wetted parts, and a discharge indexable through eight positions at 45 degrees. Charts on file run from 50ZJ-I-A50 to 300ZJ-I-A70.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Horizontal, axial-suction, single-stage single-suction centrifugal slurry pump. The ZJ series is a widely used energy-efficient abrasive-duty pump with a double metal casing and high-chrome wetted parts. The discharge can be indexed through eight positions at 45 degree intervals. It suits medium and light continuous duties in mining, power and coal preparation.
For example 100ZJ-I-A36: 100 is the discharge bore (mm), ZJ the series, I a single stage (II denotes two stages), A the vane count code (A = 5 vanes) and 36 the nominal impeller diameter (cm).
Typical coverage: bores about 40-350 mm, flow about 4-4000 m3/h and head about 6-130 m.
| Model | Max. power kW | Q m³/h | H m | n r/min | Max. eff. % |
|---|---|---|---|---|---|
| 300ZJ-I-A100 | 590 | 913 | 243.0 | 66.7 | 4.1 |
| 300ZJ-I-A100 | 590 | 1785 | 361.0 | 80.4 | 4.1 |
| 300ZJ-I-A100 | 590 | 1826 | 365.4 | 80.7 | 4.1 |
| 300ZJ-I-A100 | 490 | 758 | 139.3 | 66.7 | 3.0 |
| 300ZJ-I-A100 | 490 | 1482 | 206.8 | 80.4 | 3.0 |
| 300ZJ-I-A100 | 490 | 1517 | 209.4 | 80.7 | 3.0 |
| 300ZJ-I-A95 | 590 | 867 | 217.9 | 63.7 | 4.1 |
| 300ZJ-I-A95 | 590 | 1696 | 321.6 | 77.4 | 4.1 |
| 300ZJ-I-A95 | 590 | 1735 | 325.3 | 77.7 | 4.1 |
| 300ZJ-I-A95 | 490 | 720 | 125.0 | 63.7 | 3.0 |
| 300ZJ-I-A95 | 490 | 1408 | 184.3 | 77.4 | 3.0 |
| 300ZJ-I-A95 | 490 | 1441 | 186.4 | 77.7 | 3.0 |
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

High-chrome wear alloy or rubber; metal parts are preferred fo…

High-chrome wear alloy, rubber lining or wear/corrosion-resist…

Wear-resistant alloy, stainless or 3Cr13-type martensitic stee…

High-chrome wear alloy or wear-resistant rubber, matched to th…
Excerpts that apply to this series; read the full text on the online reading page.
100 is the discharge bore in mm, ZJ the series, I the build code, A the impeller code and 36 the impeller diameter class in cm. The model page carries the full breakdown.
Both use high-chrome alloys; the difference is construction and hydraulics. ZJ is compact with widely shared parts; AH covers wider bores and flows with heavier frames. Wear life follows the material grade and duty, not the series name.
Yes, though packing or an expeller seal is more common with solids. Converting requires checking sleeve dimensions, flush arrangement and casing pressure, not just swapping the seal body.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.