Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Applications/Power Industry
APPLICATIONS · POWER INDUSTRY

Slurry pumps for Power IndustryAsh handling and FGD limestone slurry: wear and corrosion acting together.

Power stations have three slurry duties: ash and slag handling, wet FGD limestone slurry circulation, and site wastewater. FGD slurry combines abrasion with chloride corrosion, which is why it uses a dedicated slurry circulation pump.

Duty characteristics, wear patterns, selection notes and common questions for this industry, with the matching series and wear parts.

DT series FGD slurry circulation pump
Power Industry
DUTY

Duty characteristics

SELECTION

Pump and material by duty

Common combinations; the final choice follows a duty calculation.

Duty conditionSelection and material
Wet FGD slurryDT series FGD pump, metal or rubber-lined, with mechanical seal and flush water
Ash and slag waterHigh-chrome wetted parts with large passage capability
Chloride-bearing slurryDuplex stainless or rubber-lined options; avoid standard cast iron
High flow, low headLow-speed large-flow unit to control wear rate
MATCHING RANGE

Recommended series and wear parts

Model pages list construction, code explanation and chart extracts; part pages list basic number and material.

FAQ

Power Industry slurry pump questions

Why is corrosion as important as abrasion in FGD pumps?

Limestone and gypsum slurry contains chlorides, so metal parts corrode while they wear. Life falls well short of a pure wear estimate unless the alloy resists both.

Why do mechanical seals fail on FGD duty?

Fine solids reach the seal faces, or flush water pressure is low or interrupted. Guarantee flush water quality, pressure and flow, and add protection.

Can a rubber-lined pump handle ash water?

Yes for fine ash water, where rubber reduces wear and friction. It is not suitable for coarse slag.

Next step

Send the power industry duty parameters

Medium, concentration, particle size, flow and head are enough to propose a pump, a material and a spare-parts list. For a replacement, a nameplate photo confirms the part numbers.

Selection support for Power Industry

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry