Tailings transport is the last and least stoppable stage of a plant: high flow, high concentration, long distance, often several pumps in series. Efficiency, NPSH margin and stability matter more here than pure wear resistance.
Duty characteristics, wear patterns, selection notes and common questions for this industry, with the matching series and wear parts.

Common combinations; the final choice follows a duty calculation.
| Duty condition | Selection and material |
|---|---|
| Long distance, high concentration | ZGB high-head units or series operation, checked against the pipeline curve |
| Variable flow | VFD or impeller trimming instead of permanent throttling |
| Fine particles with reagents | Rubber or high-chrome by corrosivity |
| Settling risk | Provide flushing before shutdown to avoid a seized impeller |
Model pages list construction, code explanation and chart extracts; part pages list basic number and material.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

High-chrome wear alloy, rubber lining or wear/corrosion-resist…

Heavy rolling bearings (cylindrical roller plus thrust/angular…
Check inlet pressure and NPSH for each stage so downstream pumps are not over-pressured and upstream pumps are not overloaded. Keep inter-stage piping tight to prevent reverse flow on shutdown.
In most cases the loss is clearance from worn wetted parts. New impeller and liners restore efficiency at far lower cost than a new pump.
Flush the pump and pipeline with clean water before stopping. Bar the shaft over before restarting to confirm the impeller is free.
Medium, concentration, particle size, flow and head are enough to propose a pump, a material and a spare-parts list. For a replacement, a nameplate photo confirms the part numbers.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.