Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry Pump Impeller Supplier
SLURRY PUMP IMPELLER SUPPLIER

Slurry Pump Impeller SupplierMetal and rubber impellers, matched by model, part number or worn-part dimensions

Slurry pump impellers in high-chrome alloy, rubber and polyurethane, identified by pump model, basic part number 147 or dimensions taken from the worn part.

Most impeller failures are material failures rather than dimensional ones: rubber torn by coarse solids, or standard metal perforated by fine corrosive slurry. Describing the medium accurately is worth more than comparing unit prices.

Rubber slurry pump impeller
Slurry Pump Impeller Supplier
TYPES

Closed, semi-open, metal and rubber

Structure decides passage capability; material decides service life.

TypeCharacteristics and use
Closed impellerShrouded passages, higher efficiency, for fine to medium particles and energy-saving duty.
Semi-open impellerWider passage, better solids handling, for coarse or blocking particles.
High-chrome impellerA05 / Cr26 type alloy for coarse abrasive solids.
Rubber impellerRubber on a steel core for fine particles and mild corrosion; lighter and quieter.
MATERIAL

Material route by duty

MaterialDutyWatch point
High-chrome alloyCoarse, highly abrasive, continuousHardness and heat treatment state; untempered parts wear fast
RubberFine, mild acid or alkali, moderate temperatureCut by sharp coarse solids; bonding quality matters
PolyurethaneFine particles, wear with some elasticityHydrolysis resistance must be checked for the medium
Stainless / duplexChlorides and aggressive corrosionLower abrasion resistance; assess wear and corrosion together
CROSS-REFERENCE

Matching an impeller to an existing pump

Four checks before a replacement impeller is quoted.

REPLACEMENT

Three points often missed at replacement

FAQ

Slurry Pump Impeller Supplier — frequently asked questions

Can you make an impeller from a sample?

We can assess it with the worn part or full dimensions (OD, inlet diameter, hub bore, thread or keyway) plus the duty, so that material is decided at the same time.

How much longer does a rubber impeller last?

It depends on the duty. In fine, mildly corrosive slurry rubber often lasts longer; with coarse angular solids metal is clearly better. There is no universal ratio.

Why do impeller prices vary so much?

Alloy grade and heat treatment, casting quality, machining accuracy and balancing. Two parts sold as "high chrome" can differ greatly in life.

Which parts should be checked with a new impeller?

Front and frame plate liners, volute liner, shaft sleeve and seal. A release ring and lock nut are worth keeping in stock.

Next step

Send the duty or the part number

For a pump, send medium, flow, head, concentration and site conditions. For parts, send the pump model, frame code and basic part number, or a photo of the worn part. We normally confirm the item and price within one business day.

Send an inquiry

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry