
The DT series serves limestone-gypsum slurry circulation in wet flue gas desulphurisation. The medium is usually mildly acidic and carries crystalline solids, so both abrasion and corrosion are considered; wetted materials follow pH, chloride content and temperature.
Each segment explained against published industry naming conventions.
| Field | Meaning |
|---|---|
| Discharge bore designation | 300 mm |
| Series code | DT FGD circulation pump |
| Build / frame code | A |
| Size designation | 60 (definitions vary between manufacturers) |
DT Series Desulphurisation Pump
High-flow, medium-low head circulation with emphasis on steady operation.
Wetted parts balance wear and corrosion resistance, commonly high-chrome alloy or rubber lining.
Slurry pH, chloride concentration, temperature and solids content must be checked.
Mechanical or packing seals are selected according to flush-water availability.
Absorber slurry circulation in wet FGD
Limestone and gypsum slurry transfer
Mildly corrosive slurry with crystalline solids

High-chrome wear alloy, duplex stainless steel or rubber lining, selected against the combined corrosion and abrasion severity.
Mechanical seals require clean flush/cooling water; packing seals need periodic gland adjustment and shaft sleeve inspection.
Clear-water data for this model, full series charts and notes from the manuals.
| Parameter | Value / description |
|---|---|
| Discharge bore designation | 300 mm |
| Series code | DT FGD circulation pump |
| Build / frame code | A |
| Size designation | 60 (definitions vary between manufacturers) |
| Construction | Horizontal, single-stage single-suction FGD circulation pump |
| Wetted material options | High-chrome wear alloy, duplex stainless steel or rubber lining, selected against the combined corrosion and abrasion severity. |
| Shaft seal options | Mechanical seals require clean flush/cooling water; packing seals need periodic gland adjustment and shaft sleeve inspection. |
| Published series coverage | Published coverage spans several bore and flow classes; exact figures are confirmed against the duty and written documents. |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 300DT-A60 | 989 | 1170 1779 2403 | 53.1 47.1 36.1 | 235.6 281.4 313.3 | 71.8 81.1 75.4 | 8.4 | Y400-6 Y400-6 Y400-6 | 315/6000 355/6000 400/6000 |
| 300DT-A60 | 742 | 878 1335 1803 | 29.9 26.5 20.3 | 99.6 118.8 132.2 | 71.8 81.8 75.4 | 4.3 | Y355M1-8 Y355M2-8 Y355M2-8 | 132/380 160/380 160/380 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 300DT-A60 | 989 | 1170 | 53.1 | 235.6 | 71.8 | 8.4 | Y400-6 | 280/6000 |
| 300DT-A60 | 989 | 1779 | 47.1 | 281.4 | 81.1 | 8.4 | Y400-6 | 280/6000 |
| 300DT-A60 | 989 | 2403 | 36.1 | 313.3 | 75.4 | 8.4 | Y400-6 | 400/6000 |
| 300DT-A60 | 742 | 878 | 29.9 | 99.6 | 71.8 | 4.3 | Y355M1-8 | 132/380 |
| 300DT-A60 | 742 | 1335 | 26.5 | 118.8 | 81.1 | 4.3 | Y355M2-8 | 160/380 |
| 300DT-A60 | 742 | 1803 | 20.3 | 132.2 | 75.4 | 4.3 | Y355M2-8 | 160/380 |
| Model | Q m³/h | H m | n r/min | Eff. % | NPSH m | Max. particle mm | Weight kg |
|---|---|---|---|---|---|---|---|
| 300DT-A60 | 574-2384 | 8.7-52.0 | 490-989 | 81.1 | 4.3 | 96 | 2300 |
Complete clear-water performance data for this series. Click to expand; tables scroll horizontally.
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 800DT-A96 | 595 | 5915 7250 9230 10800 | 31.3 29.2 28.8 26.5 | 632.6 653.7 815.2 926.8 | 79.7 88.2 88.8 84.1 | 10.1 | YKK6301-10 YKK6302-10 YKK6303-10 YKK710-10 | 800/6000 900/6000 1120/6000 1250/6000 |
| 800DT-A96 | 496 | 4931 6044 7694 9003 | 21.8 20.3 20.0 18.4 | 367.3 378.8 471.9 536.4 | 79.7 88.2 88.8 84.1 | 7.7 | YKK5604-12 YKK5604-12 YKK6302-12 YKK6303-12 | 500/6000 500/6000 630/6000 710/6000 |
| 800DT-A90 | 595 | 6104 8527 9170 10690 | 27.8 24.2 22.6 17.3 | 601.7 641.5 640.6 628.8 | 76.8 87.6 88.1 80.1 | 5.6 | YKK6301-10 YKK6301-10 YKK6301-10 YKK6301-10 | 800/6000 800/6000 800/6000 800/6000 |
| 800DT-A90 | 496 | 5088 7108 7644 8911 | 19.3 16.8 15.7 12.0 | 348.2 371.2 371.0 363.6 | 76.8 87.6 88.1 80.1 | 4.3 | YKK5603-12 YKK5604-12 YKK5604-12 YKK5603-12 | 450/6000 500/6000 500/6000 450/6000 |
| 700DT-A85 | 595 | 5152 6624 7360 8317 | 20.3 23.3 25.0 19.1 | 359.5 485.7 569.2 536.5 | 79.2 86.5 88.0 80.6 | 6.5 | YKK5601-10 YKK5603-10 YKK6301-10 YKK5604-10 | 500/6000 630/6000 800/6000 710/6000 |
| 700DT-A85 | 496 | 4295 5522 6135 6933 | 14.1 16.2 17.4 13.3 | 208.2 281.5 330.2 311.4 | 79.2 86.5 88.0 80.6 | 5.0 | YKK5601-10 YKK5603-10 YKK6301-10 YKK5604-10 | 500/6000 630/6000 800/6000 710/6000 |
| 700DT-A83 | 596 | 3989 5016 5916 6953 | 30.3 27.6 24.7 19.4 | 414.6 441.5 454.8 450.7 | 79.4 85.4 87.5 81.5 | 7.9 | YKK5602-10 YKK5602-10 YKK5602-10 YKK5602-10 | 560/6000 560/6000 560/6000 560/6000 |
| 700DT-A83 | 496 | 3319 4175 4923 5786 | 21.0 19.1 17.1 13.4 | 239.1 254.3 262.0 259.1 | 79.4 85.4 87.5 81.5 | 6.0 | YKK5004-12 YKK5004-12 YKK5601-12 YKK5601-12 | 315/6000 315/6000 355/6000 355/6000 |
| 700DT-A80 | 594 | 3760 4757 5293 5974 | 26.6 23.2 21.7 18.4 | 328.6 348.7 355.4 355.1 | 82.9 86.2 88.0 84.3 | 7.0 | YKK5004-10 YKK5004-10 YKK5004-10 YKK5004-10 | 450/6000 450/6000 450/6000 450/6000 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 700DT-A80 | 496 | 3139 3972 4420 4988 | 18.6 16.2 15.1 12.9 | 191.8 203.3 206.5 207.9 | 82.9 86.2 88.0 84.3 | 5.4 | YKK5002-12 YKK5002-12 YKK5003-12 YKK5003-12 | 250/6000 250/6000 280/6000 280/6000 |
| 700DT-F78 | 594 | 4693 6042 7221 8111 | 21.0 18.5 14.9 12.3 | 333.8 353.1 347.6 332.5 | 80.4 86.2 84.3 81.7 | 9.6 | YKK5004-10 YKK5004-10 YKK5004-10 YKK5004-10 | 450/6000 450/6000 450/6000 450/6000 |
| 700DT-F78 | 496 | 3919 5045 6030 6773 | 14.7 12.9 10.4 8.5 | 195.1 205.6 202.6 191.9 | 80.4 86.2 84.3 81.7 | 7.3 | YKK5002-12 YKK5003-12 YKK5002-12 YKK5002-12 | 250/6000 280/6000 250/6000 250/6000 |
| 600DT-A82 | 595 | 3300 4700 5300 5600 | 27.8 24.7 21.7 20.4 | 343.2 358.0 362.9 368.2 | 72.8 88.3 86.3 84.5 | 4.0 | YKK5601-10 YKK5601-10 YKK5601-10 YKK5601-10 | 500/6000 500/6000 500/6000 500/6000 |
| 600DT-A82 | 490 | 2718 3871 4365 4612 | 18.9 16.8 14.7 13.8 | 192.2 200.6 202.5 205.1 | 72.8 88.3 86.3 84.5 | 3.0 | YKK5003-12 YKK5003-12 YKK5003-12 YKK5003-12 | 280/6000 280/6000 280/6000 280/6000 |
| 500DT-A85 | 591 | 2040 3400 4080 | 26.8 24.4 22.0 | 204.5 266.7 305.2 | 72.8 84.7 80.1 | 4.1 | Y450-10 Y450-10 Y500-10 | 250/6000 355/6000 400/6000 |
| 500DT-A85 | 493 | 1702 2836 3403 | 18.6 17.0 15.3 | 118.4 155.0 177.0 | 72.8 84.7 80.1 | 3.1 | Y450-12 Y450-12 Y450-12 | 220/6000 220/6000 220/6000 |
| 350DT-A78 | 740 | 1332 2431 2865 | 51.1 44.5 39.6 | 289.6 377.7 408.7 | 64.0 78.0 75.6 | 6.5 | Y450-8 Y500-8 Y500-8 | 355/6000 500/6000 500/6000 |
| 350DT-A78 | 590 | 1062 1938 2284 | 32.5 28.3 25.2 | 146.9 191.5 207.3 | 64.0 78.0 75.6 | 3.5 | Y450-10 Y450-10 Y450-10 | 185/6000 250/6000 280/6000 |
| 300DT-A60 | 989 | 1170 1779 2403 | 53.1 47.1 36.1 | 235.6 281.4 313.3 | 71.8 81.1 75.4 | 8.4 | Y400-6 Y400-6 Y400-6 | 315/6000 355/6000 400/6000 |
| 300DT-A60 | 742 | 878 1335 1803 | 29.9 26.5 20.3 | 99.6 118.8 132.2 | 71.8 81.8 75.4 | 4.3 | Y355M1-8 Y355M2-8 Y355M2-8 | 132/380 160/380 160/380 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 350DT-A53 | 590 | 822 | 12.2 | 40.2 | 67.9 | 6.5 | Y315M1-10 | 55/380 |
| 350DT-A53 | 590 | 1213 | 10.0 | 42.4 | 77.8 | 6.5 | Y315M1-10 | 55/380 |
| 350DT-A53 | 590 | 1416 | 8.6 | 43.6 | 76.0 | 6.5 | Y315M1-10 | 55/380 |
| 350DT-A53 | 490 | 680 | 8.4 | 22.9 | 67.9 | 3.7 | Y250M-8 | 30/380 |
| 350DT-A53 | 490 | 1004 | 6.9 | 24.2 | 77.8 | 3.7 | Y250M-8 | 30/380 |
| 350DT-A53 | 490 | 1172 | 5.9 | 24.7 | 76.0 | 3.7 | Y250M-8 | 30/380 |
| 350DT-A51 | 592 | 626 | 10.8 | 29.0 | 63.4 | 6.5 | Y315S-10 | 45/380 |
| 350DT-A51 | 592 | 888 | 9.4 | 31.3 | 72.4 | 6.5 | Y315S-10 | 45/380 |
| 350DT-A51 | 592 | 1158 | 7.4 | 32.6 | 71.5 | 6.5 | Y315S-10 | 45/380 |
| 350DT-A51 | 490 | 518 | 7.4 | 16.5 | 63.4 | 3.7 | Y250M-8 | 30/380 |
| 350DT-A51 | 490 | 738 | 6.4 | 17.7 | 72.4 | 3.7 | Y250M-8 | 30/380 |
| 350DT-A51 | 490 | 958 | 5.1 | 18.6 | 71.5 | 3.7 | Y250M-8 | 30/380 |
| 300DT-A60 | 989 | 1170 | 53.1 | 235.6 | 71.8 | 8.4 | Y400-6 | 280/6000 |
| 300DT-A60 | 989 | 1779 | 47.1 | 281.4 | 81.1 | 8.4 | Y400-6 | 280/6000 |
| 300DT-A60 | 989 | 2403 | 36.1 | 313.3 | 75.4 | 8.4 | Y400-6 | 400/6000 |
| 300DT-A60 | 742 | 878 | 29.9 | 99.6 | 71.8 | 4.3 | Y355M1-8 | 132/380 |
| 300DT-A60 | 742 | 1335 | 26.5 | 118.8 | 81.1 | 4.3 | Y355M2-8 | 160/380 |
| 300DT-A60 | 742 | 1803 | 20.3 | 132.2 | 75.4 | 4.3 | Y355M2-8 | 160/380 |
| 200DT-B45 | 980 | 276 | 30.4 | 36.3 | 62.9 | 3.3 | Y280S-6 | 45/380 |
| 200DT-B45 | 980 | 551 | 25.6 | 47.5 | 80.8 | 3.3 | Y280M-6 | 55/380 |
| 200DT-B45 | 980 | 638 | 22.8 | 50.9 | 77.8 | 3.3 | Y315S-6 | 75/380 |
| 200DT-B45 | 730 | 206 | 16.9 | 15.1 | 62.9 | 2.0 | Y225M-8 | 22/380 |
| 200DT-B45 | 730 | 410 | 14.2 | 19.6 | 80.8 | 2.0 | Y250M-8 | 30/380 |
| 200DT-B45 | 730 | 475 | 12.7 | 21.1 | 77.8 | 2.0 | Y250M-8 | 30/380 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 150DT-A60 | 1480 | 329 | 150.0 | 232.1 | 57.9 | 7.5 | Y355L1-4 | 280/380 |
| 150DT-A60 | 1480 | 576 | 136.3 | 308.1 | 69.4 | 7.5 | Y400-4 | 355/6000 |
| 150DT-A60 | 1480 | 704 | 129.1 | 350.1 | 70.7 | 7.5 | Y400-4 | 450/6000 |
| 150DT-A60 | 980 | 218 | 65.8 | 67.5 | 57.9 | 3.4 | Y315M-6 | 90/380 |
| 150DT-A60 | 980 | 381 | 59.8 | 89.4 | 69.4 | 3.4 | Y315L1-6 | 110/380 |
| 150DT-A60 | 980 | 466 | 56.6 | 101.6 | 70.7 | 3.4 | Y315L2-6 | 132/380 |
| 150DT-A60 | 730 | 162 | 36.5 | 27.8 | 57.9 | 2.1 | Y280S-8 | 37/380 |
| 150DT-A60 | 730 | 284 | 33.2 | 37.0 | 69.4 | 2.1 | Y280M-8 | 45/380 |
| 150DT-A60 | 730 | 347 | 31.4 | 42.0 | 70.7 | 2.1 | Y315S-8 | 55/380 |
| 150DT-B55 | 990 | 280 | 53.7 | 64.8 | 63.2 | 3.7 | Y315M-6 | 90/380 |
| 150DT-B55 | 990 | 517 | 48.0 | 88.3 | 76.5 | 3.7 | Y315L1-6 | 110/380 |
| 150DT-B55 | 990 | 630 | 45.9 | 100.8 | 78.1 | 3.7 | Y315L2-6 | 132/380 |
| 150DT-B55 | 740 | 209 | 30.0 | 27.0 | 63.2 | 2.3 | Y280S-8 | 37/380 |
| 150DT-B55 | 740 | 387 | 26.8 | 36.9 | 76.5 | 2.3 | Y280M-8 | 45/380 |
| 150DT-B55 | 740 | 471 | 25.7 | 42.2 | 78.1 | 2.3 | Y315S-8 | 55/380 |
| 150DTG-A50 | 980 | 123 | 44.6 | 27.6 | 54.1 | 3.5 | Y250M-6 | 37/380 |
| 150DTG-A50 | 980 | 221 | 40.1 | 36.9 | 65.4 | 3.5 | Y280S-6 | 45/380 |
| 150DTG-A50 | 980 | 279 | 37.2 | 43.4 | 65.2 | 3.5 | Y280M-6 | 55/380 |
| 150DTG-A50 | 730 | 92 | 24.7 | 11.4 | 54.1 | 2.1 | Y200L-8 | 15/380 |
| 150DTG-A50 | 730 | 165 | 22.3 | 15.3 | 65.4 | 2.1 | Y225M-8 | 22/380 |
| 150DTG-A50 | 730 | 208 | 20.6 | 17.9 | 65.2 | 2.1 | Y250M-8 | 30/380 |
| 150DT-A40 | 1490 | 260 | 61.2 | 68.8 | 63.0 | 6.5 | Y280M-4 | 90/380 |
| 150DT-A40 | 1490 | 440 | 53.8 | 88.2 | 73.1 | 6.5 | Y315S-4 | 110/380 |
| 150DT-A40 | 1490 | 503 | 50.7 | 95.4 | 72.8 | 6.5 | Y315-4 | 110/380 |
| 150DT-A40 | 980 | 171 | 26.5 | 19.6 | 63.0 | 2.6 | Y225M-6 | 30/380 |
| 150DT-A40 | 980 | 289 | 23.3 | 25.1 | 73.1 | 2.6 | Y250M-6 | 37/380 |
| 150DT-A40 | 980 | 331 | 21.9 | 27.1 | 72.8 | 2.6 | Y250M-6 | 37/380 |
| 100DT-A60 | 1490 | 152 | 147.0 | 133.4 | 45.6 | 4.9 | Y315M2-4 | 160/380 |
| 100DT-A60 | 1490 | 256 | 138.5 | 170.9 | 56.5 | 4.9 | Y315L2-4 | 200/380 |
| 100DT-A60 | 1490 | 305 | 131.7 | 188.9 | 57.9 | 4.9 | Y355M1-4 | 220/380 |
| 100DT-A60 | 990 | 101 | 64.9 | 39.1 | 45.6 | 2.4 | Y280S-6 | 45/380 |
| 100DT-A60 | 990 | 170 | 61.2 | 50.1 | 56.5 | 2.4 | Y315S-6 | 75/380 |
| 100DT-A60 | 990 | 203 | 58.1 | 55.5 | 57.9 | 2.4 | Y315S-6 | 75/380 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 100DT-A45 | 1480 | 100 | 83.5 | 46.4 | 49.0 | 4.6 | Y250M-4 | 55/380 |
| 100DT-A45 | 1480 | 195 | 71.6 | 46.4 | 58.7 | 4.6 | Y280S-4 | 75/380 |
| 100DT-A45 | 1480 | 228 | 66.1 | 64.8 | 57.5 | 4.6 | Y280M-4 | 90/380 |
| 100DT-A45 | 980 | 66 | 36.6 | 13.4 | 49.0 | 2.2 | Y200L1-6 | 18.5/380 |
| 100DT-A45 | 980 | 129 | 31.4 | 18.8 | 58.7 | 2.2 | Y225M-6 | 30/380 |
| 100DT-A45 | 980 | 151 | 29.0 | 20.7 | 57.5 | 2.2 | Y225M-6 | 30/380 |
| 100DT-A45B | 1480 | 88 | 76.4 | 43.6 | 42.0 | 6.0 | Y250M-4 | 55/380 |
| 100DT-A45B | 1480 | 166 | 65.2 | 56.9 | 51.8 | 6.0 | Y280S-4 | 75/380 |
| 100DT-A45B | 1480 | 219 | 54.3 | 66.5 | 48.7 | 6.0 | Y280M-4 | 90/380 |
| 100DT-A45B | 970 | 57 | 32.8 | 12.1 | 42.0 | 2.4 | Y200L1-6 | 18.5/380 |
| 100DT-A45B | 970 | 109 | 28.0 | 16.0 | 51.8 | 2.4 | Y200L2-6 | 22/380 |
| 100DT-A45B | 970 | 144 | 23.3 | 18.8 | 48.7 | 2.4 | Y225M-6 | 30/380 |
| 100DTG-B45C | 1480 | 112 | 66.6 | 49.7 | 40.9 | 7.5 | 280S-4 | 75/380 |
| 100DTG-B45C | 1480 | 198 | 62.3 | 63.1 | 53.2 | 7.5 | Y280S-4 | 75/380 |
| 100DTG-B45C | 1480 | 233 | 58.7 | 69.5 | 53.6 | 7.5 | Y280M-4 | 90/380 |
| 100DTG-B45C | 980 | 74 | 29.2 | 14.4 | 40.9 | 3.6 | Y200L1-6 | 18.5/380 |
| 100DTG-B45C | 980 | 131 | 27.3 | 18.3 | 53.2 | 3.6 | Y225M-6 | 30/380 |
| 100DTG-B45C | 980 | 154 | 25.7 | 20.1 | 53.6 | 3.6 | Y225M-6 | 30/380 |
| 100DT-B40 | 1480 | 129 | 61.0 | 37.7 | 56.9 | 3.5 | Y225M-4 | 45/380 |
| 100DT-B40 | 1480 | 219 | 56.1 | 48.7 | 68.7 | 3.5 | Y280S-4 | 75/380 |
| 100DT-B40 | 1480 | 268 | 53.6 | 55.6 | 70.4 | 3.5 | Y280S-4 | 75/380 |
| 100DT-B40 | 970 | 85 | 26.2 | 10.7 | 56.9 | 1.7 | Y180L-6 | 15/380 |
| 100DT-B40 | 970 | 144 | 24.1 | 13.8 | 68.7 | 1.7 | Y200L2-6 | 22/380 |
| 100DT-B40 | 970 | 176 | 82.9 | 65.8 | 58.7 | 1.7 | Y200L2-6 | 22/380 |
| 100DTG-B38CS | 1480 | 85 | 94.1 | 47.6 | 45.8 | 7.1 | Y250M-4 | 55/380 |
| 100DTG-B38CS | 1480 | 136 | 90.7 | 60.0 | 56.0 | 7.1 | Y280S-4 | 75/380 |
| 100DTG-B38CS | 1480 | 171 | 82.9 | 65.8 | 58.7 | 7.1 | Y280M-4 | 90/380 |
| 100DTG-B38CS | 970 | 56 | 40.4 | 13.5 | 45.8 | 3.4 | Y200L1-6 | 18.5/380 |
| 100DTG-B38CS | 970 | 89 | 39.0 | 16.9 | 56.0 | 3.4 | Y200L2-6 | 22/380 |
| 100DTG-B38CS | 970 | 112 | 35.6 | 18.5 | 58.7 | 3.4 | Y225M-6 | 30/380 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 100DT-A35 | 1480 | 163 | 45.9 | 33.5 | 60.9 | 4.1 | Y225M-4 | 45/380 |
| 100DT-A35 | 1480 | 278 | 41.5 | 43.7 | 71.9 | 4.1 | Y250M-4 | 55/380 |
| 100DT-A35 | 1480 | 323 | 39.2 | 47.1 | 73.2 | 4.1 | Y250M-4 | 55/380 |
| 100DT-A35 | 970 | 107 | 19.7 | 9.4 | 60.9 | 1.9 | Y180L-6 | 15/380 |
| 100DT-A35 | 970 | 182 | 17.8 | 12.3 | 71.9 | 1.9 | Y200L1-6 | 18.5/380 |
| 100DT-A35 | 970 | 212 | 16.8 | 13.3 | 73.2 | 1.9 | Y200L1-6 | 18.5/380 |
| 80DT-A36 | 1480 | 86 | 47.1 | 23.3 | 47.7 | 3.2 | Y200L-4 | 30/380 |
| 80DT-A36 | 1480 | 151 | 42.0 | 28.5 | 60.7 | 3.2 | Y225S-4 | 37/380 |
| 80DT-A36 | 1480 | 167 | 39.9 | 29.3 | 62.0 | 3.2 | Y225S-4 | 37/380 |
| 80DT-A36 | 970 | 56 | 20.2 | 6.5 | 47.4 | 1.5 | Y160L-6 | 11/380 |
| 80DT-A36 | 970 | 99 | 18.0 | 8.0 | 60.7 | 1.5 | Y160L-6 | 11/380 |
| 80DT-A36 | 970 | 109 | 17.1 | 8.2 | 62.0 | 1.5 | Y160L-6 | 11/380 |
| 65DT-A40 | 1480 | 71 | 63.2 | 26.2 | 46.7 | 4.5 | Y225S-4 | 37/380 |
| 65DT-A40 | 1480 | 141 | 57.5 | 35.6 | 62.1 | 4.5 | Y225M-4 | 45/380 |
| 65DT-A40 | 1480 | 159 | 54.6 | 38.1 | 62.1 | 4.5 | Y225M-4 | 45/380 |
| 65DT-A40 | 970 | 47 | 27.1 | 7.4 | 45.7 | 2.1 | Y160L-6 | 11/380 |
| 65DT-A40 | 970 | 92 | 24.7 | 10.0 | 62.1 | 2.1 | Y180L-6 | 15/380 |
| 65DT-A40 | 970 | 104 | 23.5 | 10.7 | 62.1 | 2.1 | Y180L-6 | 15/380 |
| 65DT-A30 | 1470 | 44 | 35.6 | 9.1 | 46.7 | 4.6 | Y160L-4 | 15/380 |
| 65DT-A30 | 1470 | 79 | 32.6 | 12.8 | 54.6 | 4.6 | Y180M-4 | 18.5/380 |
| 65DT-A30 | 1470 | 99 | 30.7 | 15.4 | 53.8 | 4.6 | Y180L-4 | 22/380 |
| 65DT-A30 | 960 | 29 | 15.2 | 2.6 | 45.7 | 2.2 | Y132M2-6 | 5.5/380 |
| 65DT-A30 | 960 | 51 | 13.9 | 3.5 | 54.6 | 2.2 | Y132M2-6 | 5.5/380 |
| 65DT-A30 | 960 | 64 | 13.1 | 4.2 | 53.8 | 2.2 | Y132M2-6 | 5.5/380 |
| 50DT-B40 | 1470 | 52 | 61.0 | 20.5 | 42.0 | 2.5 | Y180L-4 | 22/380 |
| 50DT-B40 | 1470 | 90 | 55.0 | 24.9 | 54.0 | 2.5 | Y200L-4 | 30/380 |
| 50DT-B40 | 1470 | 100 | 53.0 | 26.2 | 55.0 | 2.5 | Y200L-4 | 30/380 |
| 50DT-B40 | 970 | 35 | 27.0 | 6.1 | 42.0 | 1.2 | Y160M-6 | 7.5/380 |
| 50DT-B40 | 970 | 60 | 24.0 | 7.3 | 54.0 | 1.2 | Y160M-6 | 7.5/380 |
| 50DT-B40 | 970 | 66 | 23.5 | 7.7 | 55.0 | 1.2 | Y160M-6 | 7.5/380 |
| Model | n r/min | Q m³/h | H m | Shaft power kW | Eff. % | NPSH m | Motor model | Power / voltage |
|---|---|---|---|---|---|---|---|---|
| 50DT-A30 | 1460 | 34 | 36.3 | 7.8 | 43.1 | 1.6 | Y160M-4 | 11/380 |
| 50DT-A30 | 1460 | 55 | 31.9 | 9.9 | 48.5 | 1.6 | Y160L-4 | 15/380 |
| 50DT-A30 | 1460 | 78 | 26.4 | 12.4 | 45.4 | 1.6 | Y180M-4 | 18.5/380 |
| 50DT-A30 | 960 | 22 | 15.7 | 2.2 | 43.1 | 0.8 | Y132M1-6 | 4/380 |
| 50DT-A30 | 960 | 36 | 13.8 | 2.8 | 48.5 | 0.8 | Y132M2-6 | 5.5/380 |
| 50DT-A30 | 960 | 51 | 11.4 | 3.5 | 45.4 | 0.8 | Y132M2-6 | 5.5/380 |
| 40DT-A25 | 2950 | 35.5 | 88.6 | 20.7 | 41.3 | - | Y200L1-2 | 30/380 |
| 40DT-A25 | 2950 | 58.8 | 73.5 | 27.7 | 42.5 | - | Y200L2-2 | 37/380 |
| 40DT-A25 | 2950 | 74.7 | 60.8 | 31.2 | 39.6 | - | Y200L2-2 | 37/380 |
| 40DT-A25 | 1440 | 17.3 | 21.1 | 2.4 | 41.3 | 2.6 | Y112M-4 | 4/380 |
| 40DT-A25 | 1440 | 28.7 | 17.5 | 3.2 | 42.5 | 2.6 | Y132S-4 | 5.5/380 |
| 40DT-A25 | 1440 | 36.5 | 14.5 | 3.6 | 39.6 | 2.6 | Y132S-4 | 5.5/380 |
| 40DT-B20 | 2930 | 16.6 | 57.5 | 6.4 | 40.9 | 3.5 | Y160M1-2 | 11/380 |
| 40DT-B20 | 2930 | 33.3 | 49.9 | 8.5 | 53.0 | 3.5 | Y160M2-2 | 15/380 |
| 40DT-B20 | 2930 | 37.1 | 47.1 | 9.2 | 52.0 | 3.5 | Y160M2-2 | 15/380 |
| 40DT-B20 | 1430 | 8.1 | 13.7 | 0.7 | 40.9 | 0.9 | Y90L-4 | 1.5/380 |
| 40DT-B20 | 1430 | 16.3 | 11.9 | 1.0 | 53.0 | 0.9 | Y100L1-4 | 2.2/380 |
| 40DT-B20 | 1430 | 18.1 | 11.2 | 1.1 | 52.0 | 0.9 | Y100L1-4 | 2.2/380 |
| 250DT-A25 | 1440 | 9.6 | 21.6 | 1.7 | 33.2 | 7.1 | Y100L2-4 | 3/380 |
| 250DT-A25 | 1440 | 17.8 | 16.6 | 2.1 | 38.0 | 7.1 | Y112M-4 | 4/380 |
| 250DT-A25 | 1440 | 19.9 | 13.9 | 2.2 | 33.8 | 7.1 | Y112M-4 | 4/380 |
| 250DT-A25 | 910 | 6.0 | 8.6 | 0.4 | 33.2 | 3.3 | Y90S-6 | 0.75/380 |
| 250DT-A25 | 910 | 11.2 | 6.6 | 0.5 | 38.0 | 3.3 | Y90L-6 | 1.1/380 |
| 250DT-A25 | 910 | 12.5 | 5.5 | 0.6 | 33.8 | 3.3 | Y90L-6 | 1.1/380 |
| 25DT-A15 | 2900 | 9.2 | 34.4 | 2.6 | 32.7 | 5.3 | Y132S1-2 | 5.5/380 |
| 25DT-A15 | 2900 | 17.1 | 29.5 | 3.3 | 41.8 | 5.3 | Y132S1-2 | 5.5/380 |
| 25DT-A15 | 2900 | 19.3 | 27.1 | 3.5 | 40.8 | 5.3 | Y132S1-2 | 5.5/380 |
| 25DT-A15 | 1390 | 4.4 | 7.9 | 0.3 | 32.7 | 1.3 | Y801-4 | 0.55/380 |
| 25DT-A15 | 1390 | 8.2 | 6.8 | 0.4 | 41.8 | 1.3 | Y802-4 | 0.75/380 |
| 25DT-A15 | 1390 | 9.3 | 6.2 | 0.4 | 40.8 | 1.3 | Y802-4 | 0.75/380 |
| Model | Max. power kW | Q m³/h | H m | n r/min | Eff. % | NPSH m | Max. particle mm | Weight kg |
|---|---|---|---|---|---|---|---|---|
| 350ZJ-I-F100 | 560 | 526-2339 | 14.9-62.8 | 300-590 | 77.6 | 4.4 | 96 | 5470 |
| 350ZJ-I-C104 | 560 | 1335-3300 | 36.6-66.9 | 490-590 | 77.6 | 7.3 | 150 | 6750 |
| 350ZJ-I-C100 | 710 | 834-3502 | 11.1-60.0 | 300-593 | 73.0 | 7.4 | 150 | 6710 |
| 350ZJ-I-A85 | 710 | 1025-3741 | 12.3-62.3 | 400-742 | 77.2 | 10.5 | 71 | 4800 |
| 350ZJ-I-A80 | 630 | 837-3575 | 8.4-56.4 | 400-742 | 75.7 | 10.5 | 70 | 4100 |
| 300ZJ-I-A100 | 450 | 464-1826 | 15.3-65.2 | 300-590 | 81.1 | 3.0 | 88 | 4580 |
| 300ZJ-I-B100 | 450 | 464-1826 | 15.3-65.2 | 300-590 | 76.2 | 3.0 | 112 | 4580 |
| 300ZJ-I-A95 | 400 | 441-1735 | 13.8-58.8 | 300-590 | 78.1 | 3.0 | 88 | 4535 |
| 300ZJ-I-A90 | 560 | 505-1844 | 21.2-79.9 | 400-730 | 82.8 | 3.9 | 85 | 4656 |
| 300ZJ-I-C90 | 400 | 604-2392 | 10.9-50.9 | 300-590 | 78.6 | 3.6 | 150 | 5060 |
| 300ZJ-I-A85 | 450 | 477-1742 | 18.9-71.3 | 400-730 | 79.8 | 3.8 | 85 | 4525 |
| 300ZJ-I-A70 | 630 | 635-2333 | 16.0-76.8 | 490-980 | 80.4 | 3.9 | 92 | 3274 |
| 300ZJ-I-A65 | 500 | 589-2166 | 13.8-66.2 | 490-980 | 77.4 | 3.7 | 92 | 3245 |
| 300ZJ-I-A56 | 250 | 395-1568 | 9.7-46.0 | 490-980 | 80.9 | 3.5 | 96 | 2340 |
| 250ZJ-I-A103 | 560 | 402-1573 | 29.7-110.5 | 400-730 | 74.5 | 2.8 | 69 | 5230 |
| 250ZJ-I-A96 | 560 | 403-1466 | 25.4-93.7 | 400-730 | 77.8 | 3.5 | 69 | 4200 |
| 250ZJ-I-A90 | 450 | 378-1374 | 22.3-82.4 | 400-730 | 73.8 | 3.4 | 69 | 4145 |
| 250ZJ-I-A85 | 800 | 376-1504 | 30.1-128.7 | 490-980 | 76.5 | 3.5 | 76 | 4100 |
| 250ZJ-I-A83 | 800 | 367-1469 | 28.7-122.7 | 490-980 | 75.5 | 3.5 | 76 | 4085 |
| 250ZJ-I-A80 | 710 | 354-1416 | 26.7-114.0 | 490-980 | 73.5 | 3.4 | 76 | 4060 |
| 250ZJ-I-C80 | 450 | 451-1790 | 7.4-38.3 | 300-592 | 75.1 | 3.3 | 120 | 4832 |
| 250ZJ-I-A78 | 630 | 415-1796 | 21.1-102.5 | 490-980 | 71.5 | 3.2 | 76 | 4045 |
| 250ZJ-I-A75 | 560 | 300-1480 | 20.8-97.5 | 490-980 | 77.5 | 3.0 | 72 | 2760 |
| 250ZJ-I-A73 | 500 | 292-1441 | 19.7-92.4 | 490-980 | 76.5 | 3.0 | 72 | 2745 |
| 250ZJ-I-A70 | 450 | 280-1381 | 18.1-84.9 | 490-980 | 74.5 | 2.9 | 72 | 2725 |
| 250ZJ-I-A68 | 450 | 272-1342 | 17.1-80.1 | 490-980 | 73.5 | 2.7 | 72 | 2712 |
| 250ZJ-I-A65 | 315 | 299-1249 | 15.4-71.0 | 490-980 | 76.9 | 3.0 | 72 | 2520 |
| 250ZJ-I-A63 | 315 | 290-1211 | 14.4-66.7 | 490-980 | 75.9 | 3.0 | 72 | 2508 |
| 250ZJ-I-A60 | 280 | 276-1153 | 13.1-60.5 | 490-980 | 73.9 | 2.8 | 72 | 2490 |
| 200ZJ-I-A85 | 560 | 221-907 | 32.0-133.7 | 490-980 | 70.5 | 2.8 | 54 | 3844 |
| 200ZJ-I-A75 | 355 | 225-900 | 22.8-102.9 | 490-980 | 74.1 | 3.0 | 56 | 2880 |
| 200ZJ-I-A73 | 355 | 219-876 | 21.6-97.5 | 490-980 | 73.1 | 3.0 | 56 | 2865 |
| 200ZJ-I-A70 | 315 | 205-976 | 19.4-86.4 | 490-980 | 75.6 | 2.8 | 56 | 2256 |
| 200ZJ-I-A68 | 315 | 199-948 | 18.3-81.5 | 490-980 | 74.6 | 2.8 | 56 | 2248 |
| 200ZJ-I-A65 | 250 | 235-950 | 16.4-72.0 | 490-980 | 79.6 | 2.5 | 62 | 2000 |
| 200ZJ-I-A63 | 250 | 228-921 | 15.4-67.6 | 490-980 | 78.6 | 2.5 | 62 | 1988 |
| 200ZJ-I-A60 | 185 | 218-870 | 13.9-62.0 | 490-980 | 83.5 | 2.5 | 62 | 1800 |
| 200ZJ-I-A58 | 185 | 211-841 | 13.0-57.9 | 490-980 | 82.5 | 2.5 | 62 | 1791 |
| 150ZJ-I-A71 | 220 | 142-552 | 21.8-93.8 | 490-980 | 69.8 | 2.4 | 48 | 2093 |
| 150ZJ-I-A70 | 185 | 93-401 | 20.2-91.2 | 490-980 | 62.3 | 2.0 | 37 | 1943 |
| 150ZJ-I-A65 | 200 | 150-600 | 17.4-75.7 | 490-980 | 70.8 | 2.5 | 48 | 1892 |
| 150ZJ-I-A63 | 185 | 146-582 | 16.3-71.1 | 490-980 | 69.8 | 2.5 | 48 | 1880 |
| 150ZJ-I-A60 | 160 | 135-550 | 14.7-63.5 | 490-980 | 75.9 | 2.5 | 48 | 1760 |
| 150ZJ-I-A58 | 132 | 131-532 | 13.7-59.3 | 490-980 | 74.9 | 2.5 | 48 | 1730 |
| 150ZJ-I-C58 | 160 | 134-596 | 12.8-61.0 | 490-980 | 69.1 | 2.0 | 75 | 1825 |
| 150ZJ-I-A57 | 110 | 95-427 | 13.2-56.3 | 490-980 | 67.8 | 1.8 | 32 | 1820 |
| 150ZJ-I-A55 | 110 | 124-504 | 12.3-53.4 | 490-980 | 72.9 | 2.3 | 48 | 1810 |
| 150ZJ-I-A50 | 75 | 115-460 | 9.5-43.1 | 490-980 | 76.8 | 2.5 | 48 | 1198 |
| 150ZJ-I-A48 | 75 | 111-442 | 8.7-39.7 | 490-980 | 75.8 | 2.5 | 48 | 1185 |
| 150ZJ-I-C42 | 132 | 142-550 | 12.1-62.8 | 700-1480 | 77.1 | 2.2 | 69 | 1070 |
| 100ZJ-I-A50 | 160 | 85-360 | 20.5-100.2 | 700-1480 | 69.6 | 2.5 | 34 | 987 |
| 100ZJ-I-A46 | 132 | 79-331 | 17.3-84.8 | 700-1480 | 67.6 | 2.3 | 34 | 973 |
| 100ZJ-I-A42 | 90 | 66-275 | 14.7-70.8 | 700-1480 | 71.0 | 2.5 | 35 | 625 |
| 100ZJ-I-A39 | 75 | 61-255 | 12.6-61.0 | 700-1480 | 39.0 | 2.4 | 35 | 615 |
| 100ZJ-I-B42 | 90 | 83-365 | 12.7-66.8 | 700-1480 | 71.6 | 2.5 | 40 | 635 |
| 100ZJ-I-A36 | 55 | 61-245 | 9.7-49.5 | 700-1480 | 71.6 | 2.0 | 32 | 597 |
| 100ZJ-I-A33 | 45 | 56-225 | 8.2-41.6 | 700-1480 | 69.6 | 1.8 | 32 | 590 |
| 80ZJ-I-A52 | 160 | 51-242 | 22.1-109.8 | 700-1480 | 56.3 | 2.1 | 21 | 993 |
| 80ZJ-I-A42 | 75 | 61-204 | 14.4-70.4 | 700-1480 | 66.7 | 2.5 | 24 | 599 |
| 80ZJ-I-A39 | 55 | 57-189 | 12.4-60.7 | 700-1480 | 64.7 | 2.4 | 24 | 589 |
| 80ZJ-I-A36 | 45 | 46-190 | 9.6-51.4 | 700-1480 | 67.7 | 2.5 | 24 | 559 |
| 80ZJ-I-A33 | 37 | 43-174 | 8.0-43.2 | 700-1480 | 65.7 | 2.3 | 24 | 552 |
| 65ZJ-I-A30 | 15 | 23-79 | 7.4-34.8 | 700-1460 | 63.5 | 2.0 | 19 | 450 |
| 65ZJ-I-A27 | 11 | 20-71 | 6.0-28.2 | 700-1460 | 61.5 | 1.8 | 19 | 445 |
| 50ZJ-I-A50 | 90 | 27-111 | 22.3-110.7 | 700-1480 | 45.1 | 3.0 | 13 | 941 |
| 50ZJ-I-A46 | 55 | 23-94 | 17.9-85.8 | 700-1480 | 44.7 | 1.4 | 14 | 657 |
| 50ZJ-I-A33 | 18.5 | 12-54 | 7.7-42.5 | 700-1480 | 42.1 | 2.9 | 13 | 395 |
| 40ZJ-I-A19 | 15 | 8.0-34.9 | 12.8-57.1 | 1430-2930 | 58.8 | 1.3 | 11 | 116 |
| 40ZJ-I-A17 | 7.5 | 4.5-23.4 | 9.1-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 90 |
| Model | Q m³/h | H m | n r/min | Eff. % | NPSH m | Max. particle mm | Weight kg |
|---|---|---|---|---|---|---|---|
| 1000DT-A130 | 8857-16000 | 14.6-32.0 | 310-440 | 86.1 | 6.0 | 118 | 12400 |
| 900DT-F110 | 4907-14076 | 8.5-32.7 | 300-490 | 88.3 | 6.5 | 96 | 9480 |
| 800DT-A105 | 7412-14800 | 16.0-41.5 | 450-595 | 86.7 | 4.0 | 96 | 6680 |
| 800DT-A100 | 5983-12300 | 12.7-37.2 | 400-595 | 87.7 | 7.8 | 150 | 6660 |
| 800DT-A93 | 5169-12168 | 9.3-32.2 | 400-595 | 85.6 | 9.1 | 66 | 6650 |
| 800DT-A90 | 4104-10690 | 7.8-27.8 | 400-595 | 86.4 | 4.3 | 88 | 5940 |
| 700DT-A93 | 4083-10560 | 9.3-35.0 | 400-595 | 83.2 | 6.1 | 70 | 5660 |
| 700DT-A90 | 3551-8988 | 10.0-33.8 | 400-595 | 86.7 | 5.6 | 68 | 5400 |
| 700DT-A83 | 2677-6491 | 8.7-30.2 | 400-595 | 85.9 | 6.0 | 70 | 5900 |
| 700DT-B78 | 3378-7200 | 10.0-21.8 | 400-595 | 84.7 | 4.3 | 65 | 5040 |
| 650DT-B80 | 3961-7673 | 15.6-38.3 | 550-740 | 86.3 | 9.6 | 60 | 4120 |
| 600DT-A82 | 1664-5600 | 5.2-27.8 | 300-595 | 88.3 | 2.2 | 152 | 3960 |
| 550DT-A75 | 2622-6563 | 11.6-38.2 | 490-740 | 81.5 | 5.7 | 60 | 2680 |
| 550DT-A70 | 2298-5708 | 8.0-30.1 | 450-740 | 82.2 | 4.5 | 60 | 2666 |
| 500DT-A76 | 1555-3881 | 9.9-27.9 | 450-595 | 76.8 | 4.5 | 58 | 3512 |
| 500DT-A75 | 1655-4300 | 12.2-40.1 | 490-740 | 83.8 | 5.3 | 58 | 2502 |
| 500DT-A70 | 1908-4399 | 9.3-32.5 | 490-742 | 76.0 | 6.0 | 55 | 2900 |
| 450DT-A70 | 1655-4200 | 10.3-33.3 | 490-740 | 84.2 | 5.5 | 56 | 2550 |
| 400DT-A65 | 1134-3330 | 8.8-31.1 | 490-742 | 80.1 | 5.2 | 60 | 2340 |
| 400DT-A55 | 1020-2640 | 5.6-29.8 | 490-980 | 81.7 | 7.1 | 42 | 1675 |
| 350DT-A78 | 720-2865 | 11.6-51.1 | 400-740 | 78.0 | 3.5 | 104 | 2800 |
| 350DT-A65 | 750-2480 | 7.3-32.1 | 400-740 | 84.7 | 2.8 | 92 | 2240 |
| 350DT-A58 | 668-1970 | 5.9-24.3 | 400-740 | 82.5 | 2.8 | 99 | 2250 |
| 350DT-A52 | 963-2200 | 8.8-30.8 | 590-980 | 82.9 | 3.7 | 50 | 1238 |
| 350DT-A48 | 638-1800 | 7.0-26.7 | 590-980 | 75.9 | 4.0 | 50 | 1222 |
| 300DT-A70 | 995-2828 | 27.5-75.0 | 700-993 | 77.6 | 5.3 | 92 | 2470 |
| 300DT-A60 | 574-2384 | 8.7-52.0 | 490-989 | 81.1 | 4.3 | 96 | 2300 |
| 300DT-A50 | 440-1750 | 6.1-32.8 | 490-980 | 81.7 | 2.2 | 80 | 1140 |
| 300DT-A45 | 456-1620 | 4.2-25.0 | 490-980 | 75.5 | 3.4 | 40 | 1100 |
| 250DT-A75 | 300-1480 | 20.8-97.5 | 490-980 | 77.5 | 3.0 | 72 | 2500 |
| 250DT-A52 | 333-1220 | 8.1-42.4 | 490-980 | 81.6 | 2.3 | 65 | 1004 |
| 250DT-A48 | 480-1103 | 6.4-25.6 | 490-980 | 78.5 | 3.7 | 42 | 1030 |
| 250DT-A45 | 221-804 | 5.0-27.0 | 490-980 | 68.2 | 4.1 | 56 | 1150 |
| 250DT-B45 | 297-990 | 5.0-27.0 | 490-980 | 76.6 | 3.7 | 64 | 1150 |
| 200DT-A60 | 237-868 | 19.2-60.2 | 590-980 | 77.0 | 2.7 | 52 | 1500 |
| 200DT-B45 | 136-639 | 5.5-30.1 | 490-990 | 80.8 | 2.0 | 51 | 755 |
| 200DT-B40 | 208-648 | 4.0-21.0 | 490-980 | 77.2 | 2.6 | 36 | 720 |
| 150DT-A60 | 156-704 | 28.9-150.0 | 700-1480 | 70.7 | 2.1 | 39 | 1450 |
| 150DT-B55 | 139-630 | 11.3-53.7 | 490-990 | 78.1 | 2.3 | 56 | 815 |
| 150DT-A50 | 62-279 | 9.3-44.6 | 490-980 | 65.7 | 2.1 | 30 | 800 |
| 150DT-A40 | 122-503 | 11.2-61.2 | 700-1490 | 73.1 | 2.6 | 40 | 550 |
| 150DT-A30 | 115-330 | 10.9-31.4 | 950-1480 | 76.7 | 2.1 | 30 | 326 |
| 150DT-A27 | 117-299 | 8.2-24.0 | 950-1480 | 75.4 | 2.0 | 16 | 320 |
| 100DT-A60 | 71-305 | 29.1-147.0 | 700-1480 | 57.9 | 2.4 | 18 | 960 |
| 100DT-A50 | 85-360 | 20.5-100.2 | 700-1480 | 69.6 | 2.5 | 34 | 880 |
| 100DT-A45 | 47-228 | 14.8-83.5 | 700-1480 | 58.7 | 2.2 | 22 | 550 |
| 100DT-B40 | 61-268 | 12.0-61.0 | 700-1480 | 70.4 | 1.7 | 29 | 530 |
| 100DT-A35 | 77-323 | 8.8-45.9 | 700-1480 | 73.2 | 1.9 | 42 | 520 |
| 100DT-A30 | 77-281 | 5.5-29.8 | 700-1480 | 66.8 | 2.5 | 45 | 515 |
| 80DT-A36 | 41-167 | 8.9-47.1 | 700-1480 | 62.4 | 1.5 | 16 | 420 |
| 65DT-A40 | 34-159 | 11.5-60.1 | 700-1480 | 62.1 | 2.1 | 16 | 476 |
| 65DT-A30 | 21-99 | 7.0-35.6 | 700-1470 | 54.6 | 2.2 | 19 | 250 |
| 50DT-A50 | 27-111 | 22.3-110.7 | 700-1480 | 45.1 | 3.0 | 13 | 700 |
| 50DT-A45 | 21.6-93.6 | 15.2-81.0 | 700-1480 | 48.4 | 3.6 | 9.5 | 544 |
| 50DT-B40 | 24.5-99.5 | 12.0-60.7 | 700-1470 | 55.0 | 3.1 | 14 | 406 |
| 50DT-A30 | 16.0-78.0 | 5.8-35.1 | 700-1460 | 48.5 | 0.8 | 16 | 210 |
| 50DT-A30B | 11.0-70.0 | 6.2-36.0 | 700-1460 | 51.2 | 2.0 | 16 | 200 |
| 40DT-A40B | 12.0-39.0 | 11.0-64.3 | 700-1470 | 34.9 | 3.3 | 10 | 270 |
| 40DT-B35 | 13.8-55.0 | 7.3-45.5 | 700-1480 | 34.7 | 2.2 | 6 | 220 |
| 40DT-B35B | 10.0-40.0 | 13.0-46.6 | 700-1460 | 41.2 | 2.8 | 8 | 220 |
| 40DT-A30 | 10.4-32.5 | 9.5-34.0 | 700-1470 | 37.5 | 3.0 | 8 | 230 |
| 40DT-B30B | 9.3-35.3 | 6.1-35.3 | 700-1470 | 41.0 | 1.8 | 12 | 220 |
| 40DT-A25 | 11.5-36.5 | 6.4-21.1 | 960-1440 | 42.5 | 1.5 | 9 | 175 |
| 40DT-B20 | 7.9-37.1 | 10.7-57.5 | 1400-2930 | 53.0 | 0.9 | 7 | 85 |
| 40DT-A19 | 7.8-34.9 | 12.3-57.1 | 1400-2930 | 58.8 | 1.2 | 11 | 90 |
| 40DT-A17 | 4.6-23.4 | 9.2-44.6 | 1400-2900 | 52.4 | 2.5 | 11 | 85 |
| 25DT-A25 | 4.7-19.9 | 3.3-21.6 | 700-1440 | 38.0 | 3.3 | 5 | 70 |
| 25DT-A15 | 3.8-16.0 | 5.4-33.5 | 1390-2900 | 40.1 | 1.3 | 8 | 67 |
| Model | Max. power kW | Q m³/h | H m | n r/min | Eff. % | NPSH m | Max. particle mm | Weight kg |
|---|---|---|---|---|---|---|---|---|
| 150TL-A35 | 30 | 99-364 | 3.0-17.9 | 490-980 | 69.0 | / | 15 | 712 |
| 100TL-A34 | 45 | 74-293 | 5.5-36.8 | 700-1480 | 65.8 | / | 14 | 502 |
| 80TL-A45 | 110 | 59-286 | 12.5-81.6 | 700-1490 | 58.4 | / | 15 | 785 |
| 80TL-A36 | 45 | 50-201 | 7.3-45.5 | 700-1480 | 58.2 | / | 12 | 645 |
| 65TL-A40 | 45 | 30.2-142.8 | 10.2-62.6 | 700-1480 | 50.0 | / | 12 | 658 |
| 65TL-A30 | 18.5 | 18-98 | 5.9-34.7 | 700-1470 | 53.7 | / | 8 | 436 |
| 50TL-A45 | 55 | 21.9-117.3 | 10.4-78.4 | 700-1480 | 39.9 | / | 9.5 | 778 |
| 50TL-B40 | 30 | 15-65 | 8.6-58.3 | 700-1470 | 34.1 | / | 9 | 502 |
| 50TL-A35 | 22 | 19-87 | 6.8-45.3 | 700-1470 | 48.1 | / | 15 | 498 |
| 40TL-A35 | 18.5 | 9.4-47.6 | 7.2-43.9 | 700-1470 | 38.7 | / | 7 | 524 |
| 40TL-B25 | 5.5 | 4.9-22.9 | 3.9-21.5 | 700-1440 | 37.6 | / | 8 | 225 |
| 40TL-A21 | 4 | 4.6-25.9 | 3.3-17.0 | 700-1440 | 44.6 | / | 10 | 210 |
| 25TL-A15 | 5.5 | 4.3-19.3 | 3.9-30.8 | 1390-2900 | 29.8 | / | 8 | 195 |
| Model | Q m³/h | H m | n r/min | Eff. % | Inlet mm | Outlet mm | NPSH m | Max. particle mm |
|---|---|---|---|---|---|---|---|---|
| 100ND | 100-250 | 20-50 | 800-980 | 65-70 | 150 | 100 | < 3.0 | 50 |
| 150ND | 240-650 | 24-61 | 980-1480 | 62.5-71.7 | 250 | 150 | < 3.5 | 70 |
| 200ND | 610-1560 | 29-62 | 650-900 | 61-62.4 | 250 | 200 | < 4.5 | 143 |
| 250N | 720-1800 | 30-75 | 500-750 | 65-76 | 350 | 250 | < 4.0 | 125 |
| 250ND | 600-2000 | 21-59 | 490-740 | 68.5-79.8 | 350 | 250 | < 4.0 | 146 |
| 300N | 1600-2200 | 40-65 | 400-550 | 72-78 | 400 | 300 | < 4.5 | 135 |
| 300ND | 1500-3750 | 29-65 | 400-550 | 69-73 | 420 | 300 | < 4.5 | 201 |
| 350ND | 1700-2750 | 24-58 | 400-590 | 77-81 | 450 | 350 | < 4.0 | 122 |
| 450N | 3150-6500 | 40-65 | 350-500 | 74-80 | 600 | 450 | < 4.5 | 220 |
| 450ND | 3100-5200 | 30-66 | 350-490 | 68.5-75.2 | 600 | 450 | < 4.5 | 115 |
| 500N | 5900-9100 | 40-75 | 350-450 | 74-80 | 650 | 500 | < 4.8 | 245 |
| 500ND | 4000-7000 | 20-41 | 220-325 | 75-82 | 650 | 500 | < 4.5 | 203 |
| 600N | 6500-12000 | 45-70 | 300-400 | 78-84 | 700 | 600 | < 4.8 | 240 |
| 600ND | 4800-8900 | 20-42 | 350-420 | 82-85 | 700 | 600 | < 4.6 | 240 |
| 650ND | 8500-14300 | 23-65 | 300-450 | 82.3-85 | 800 | 650 | < 4.6 | 256 |
| 700N | 10500-16400 | 40-75 | 300-380 | 80-85 | 800 | 700 | < 6.0 | 260 |
| 700ND | 8000-13000 | 20-45 | 240-280 | 81-84 | 800 | 700 | < 5.3 | 260 |
| 800N | 14500-21800 | 55-80 | 300-360 | 81-85 | 900 | 800 | < 6.0 | 275 |
| 800ND | 9700-15400 | 20-40 | 200-280 | 82-84 | 900 | 800 | < 5.3 | 275 |
| 900N | 21000-31000 | 45-70 | 200-280 | 80-85 | 1000 | 900 | < 5.8 | 300 |
| 900ND | 12000-21500 | 20-40 | 160-210 | 82-88 | 1100 | 1000 | < 6.0 | 300 |
| 1000N | 24350-39000 | 26-78 | 210-290 | 82-85 | 1100 | 1000 | < 6.0 | 320 |
Compiled from the AH / L / G, SP, ZJ and ZGB pump manuals, with links to the full texts.
Horizontal slurry pumps are overhung centrifugal pumps for abrasive or corrosive slurry, widely used in metallurgy, mining, petrochemical, coal, power, dredging, building materials and municipal works. Families cover heavy duty (AH, HH), light duty (L), gravel / dredging (D, G) and rubber-lined (AHR, LR, MR) builds. Pumps may be staged in series within the allowable working pressure.
Heavy duty AH and HH pumps use a double casing: an outer pressure-retaining casing and cover in grey or ductile iron, vertically split and bolted, plus replaceable wear liners (impeller, volute liner, throat bush and frame plate liner) in metal or rubber. The discharge can be rotated in eight positions at 45 degree intervals. D and G gravel pumps use a single casing with all wetted parts in wear-resistant metal. Apart from the wet end, all horizontal types share the same frame and bearing assembly, with a large-diameter shaft and short overhang.
Preheat bearing inner rings to no more than 120 C during assembly and seat them firmly against the shaft shoulder or grease retainer. Inner rings, outer rings and spacers of double-row tapered roller bearings form a matched set and must not be interchanged. Wet-end assembly order: seals, frame plate liner with its locating nuts, impeller, volute liner clamped in place, then throat bush and cover plate. Lift crated pumps by the marked sling points without shock or excessive tilt; lifting eyes on the casing are for dismantling the casing only, never for lifting the complete pump.
Three shaft seal arrangements are common: expeller, packed gland and mechanical seal. The expeller seal suits single-stage pumps (or the first stage of a series set) where inlet positive pressure is below 10 percent of discharge pressure; it needs no seal water and does not dilute the slurry. A packed gland is simple to service but requires seal water. A mechanical seal gives the best sealing and requires cooling water. A packed gland comprises the stuffing box, shaft sleeve, spacer, O-rings, packing, packing spacer, lantern ring and gland. Bearings are grease or oil lubricated, with oil lubrication preferred for high temperature or large pumps.
Before start-up check that foundation and coupling bolts are tight, turn the shaft by hand in the direction of rotation without rubbing, verify motor rotation against the arrow on the casing, and align the V-belts square to the pulleys. Starting on clean water is preferable before slurry is introduced. During operation watch the instruments for flow, velocity and current and correct any abnormality. Where possible flush with clean water before stopping, then stop the pump before closing the valve. For vertical sump pumps, turn on the guide bearing flush water five minutes before starting and close it five minutes after stopping.
Check impeller-to-throatbush clearance, bearing temperature and lubrication, seal water pressure and flow, and wear of wetted parts on a regular basis. A worn impeller reduces flow and head and raises vibration and noise, so adjust the clearance or replace the wear parts. Typical faults are insufficient flow or head, bearing overheating, vibration, seal leakage and cavitation, usually caused by blockages, wrong rotation, low speed, air ingress on the suction side, inadequate NPSH or loss of dynamic balance. Record basic part numbers and material suffixes and verify them against the pump model and supplied documents.
Desulphurisation circulation pumps handle gypsum slurry containing chloride ions and mild acid, so wetted parts must resist both abrasion and corrosion, commonly using high-chrome alloy or rubber linings.
Selection must check flow, head, NPSH and motor power together with solids content, pH and chloride concentration.
Extracts from the original manuals are shown in the Chinese edition; the full texts are available via the links below.
Open each part page for function, material and replacement notes.
Models, parts and manuals related to this product.
Send the model or worn-part dimensions, or call +86 188 0321 2220 / email sale@pumpq.com.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.