Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Rubber Slurry Pump Parts Supplier
RUBBER SLURRY PUMP PARTS

Rubber Slurry Pump Parts SupplierRubber impellers, liners and cover plate liners for fine-particle and corrosive duty

Rubber slurry pump parts including rubber impellers, rubber volute liners, rubber cover plate liners and rubber-lined casings, supplied by basic part number.

Rubber is not a cheap substitute for metal. In fine-particle, mildly corrosive duty it is often the lowest cost per operating hour; with coarse sharp solids it fails within days. Particle size, shape, pH and temperature decide.

Rubber lined slurry pump casing
Rubber Slurry Pump Parts Supplier
COMPOUNDS

Rubber parts and where they stop working

Rubber resists fine-particle erosion well, and cutting and heat badly.

Compound / formSuitable dutyLimit
Natural rubber liningFine particles, mild alkali, ambient temperatureNot oil or strong acid resistant; cut by sharp solids
Nitrile rubberOily media, higher wear demandModerate weather resistance
NeopreneMild acid or alkali, outdoor and warmer dutyLimited low-temperature flexibility
PolyurethaneFine particles, wear with elasticityNot hot media; hydrolysis in some slurries
Rubber impeller / liner / cover linerFine (about 10 mm and below), rounded particlesCoarse or sharp solids, temperature above the compound limit
BONDING

Why bonding decides rubber part life

COMPARISON

Rubber or metal: the four tests

TestFavours rubberFavours metal
Particle sizeFine, about 10 mm and belowCoarse or gravel
Particle shapeRounded, milled particlesSharp, angular, flaky
pHNeutral to mildly acid or alkalineStrong acid or alkali
TemperatureWithin the compound limitAbove the compound limit
FAQ

Rubber Slurry Pump Parts Supplier — frequently asked questions

Can rubber parts be used in mining with coarse solids?

Generally no. Sharp coarse particles cut the lining and the split propagates. High-chrome alloy is the correct choice for those duties.

Do rubber parts last longer than metal?

In fine-particle, mildly corrosive slurry they usually do, with lower noise and vibration. In coarse or hot duty metal is clearly better.

What causes a rubber lining to blister?

Usually poor core preparation or adhesive failure, allowing slurry to migrate behind the rubber. A blistered lining should be replaced before pieces block the pipeline.

Is there a temperature limit?

Yes. Each compound has a continuous service temperature; above it the rubber hardens, ages and loses elasticity. Confirm the limit for the compound offered.

Next step

Send the duty or the part number

For a pump, send medium, flow, head, concentration and site conditions. For parts, send the pump model, frame code and basic part number, or a photo of the worn part. We normally confirm the item and price within one business day.

Send an inquiry

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry