When a pump "loses power", the impeller is often blamed. On inspection the liners have grooved sealing faces and the clearance has opened. Liners are inconspicuous and decide volumetric efficiency.
1. Double casing: pressure outside, wear inside
The outer casing carries pressure and connects the pipework. The volute liner, front liner and frame plate liner form the flow path. Wear parts are replaced without touching the casing or the pipeline, which keeps maintenance cost and downtime down.
2. What each liner does
| Part | Position | Function | Wear symptom |
|---|---|---|---|
| Front liner | Between cover plate and impeller eye | Forms the inlet sealing face and limits recirculation | Ring grooves in the bore, lost flow and NPSH |
| Frame plate liner | Behind the impeller, drive side | Forms the sealing chamber with the impeller shroud | Internal leakage, falling efficiency |
| Volute liner | Inside the casing | Forms the volute and converts velocity to pressure | Cutwater and discharge grooving, falling head |
3. Why clearance matters more than wall thickness
The impeller-to-liner gap is an internal short circuit. The wider it opens, the more slurry circulates inside the pump: flow and head fall, power rises, but nothing looks wrong from outside. Measure the clearance at every planned shutdown and record the trend rather than waiting for an obvious symptom.
4. When to replace
- Grooved sealing faces A ring groove that can be felt means recirculation is no longer controlled.
- Wall thickness at the limit Compare measured thickness with the allowable wear.
- Measurable performance loss At unchanged speed and pipeline, a step down in flow or head points to clearance.
- Rubber blisters or cuts Replace before pieces block the pipeline.
5. Three details at replacement
Gaskets change the clearance and must not be added casually. Joint faces must be clean, or the assembly tilts and wears on one side. The set should be assessed together: impeller, liners and volute liner usually wear as a group.
Judge liners by clearance, thickness and performance, not by appearance or months in service.