Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/News & manuals/Slurry Pump Maintenance Schedule
TECHNICAL GUIDE

Slurry Pump Maintenance ScheduleFive indicators · three levels · overhaul list

Stripping down every three months wastes money and adds risk. Vibration, temperature, leakage, flow and wall thickness are enough to decide when to stop and when to keep running.

Figures here come from the charts, the basic part number index and the manuals on file. Anything without a public source is marked as per supplied documents rather than inferred.

Slurry pump service workshop
Slurry Pump Maintenance Schedule
BY DATA

Set service intervals from data, not the calendar

The same pump may need half the service interval in FGD compared with a concentrator. Five measurable indicators beat a fixed three-month strip-down.

THREE LEVELS

Shift, monthly and annual checks

Split the checks across three levels or they will not be done in the field.

IntervalChecksLimitAction
Every shiftSeal drip, vibration, noise, bearing temperature, currentNo sudden changeRecord and hand over
Weekly / monthlyGland, foundation and pipe bolts, coupling, greaseNo looseness, grease正常Tighten, grease, adjust gland
QuarterlyImpeller clearance, liner wear, sleeveClearance within limit, no perforationAdjust or replace
Annual / overhaulBearing assembly, shaft, casing register, alignmentPer supplied documentsReplace as a set, re-align
OVERHAUL

What an overhaul covers

An overhaul returns accumulated deviation to datum in one pass; it is not a part-by-part replacement.

01

Re-check alignment: coupling radial and face deviation to the manual.

02

Replace the bearing cartridge as a unit to avoid press-fit damage.

03

Check the shaft for bending, journal wear and thread condition.

04

Clean casing registers and cover faces; renew all gaskets.

05

Renew wetted parts as a set and reset clearance for material and model.

06

Test run: bump for rotation, then two hours on load logging vibration, temperature and flow.

RECORDS

Service without records starts from zero

One table filled for a year gives both life prediction and a spares plan.

Date and hoursPart number and materialFailure patternMeasured clearanceVibration and temperatureDowntime
FAQ

Slurry Pump Maintenance Schedule: common questions

When is the first service on a new pump?

Check at 500 hours or three months, focusing on clearance change and the seal, then set the interval from the measured wear rate.

At what vibration should the pump stop?

Above 7.1 mm/s, shut down for inspection under common bands; between 4.5 and 7.1 mm/s, increase monitoring and plan service. Confirm limits for your machine.

Can I replace only the impeller?

Short term yes, but clearance cannot return to design and the new impeller wears quickly against the old liner. It rarely pays.

How do spares and intervals connect?

Measured life hours times the number of units gives annual consumption; when intervals shorten, stock must rise with them.

NEXT STEP

Send the model and duty; we check the part

For pumps, send medium, flow, head, density and installation. For parts, send model, frame code and basic number. We reply within one business day.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry