Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/News & manuals/Slurry Pump Parts Price
TECHNICAL GUIDE

Slurry Pump Parts PriceWhat sets the price · how to compare

One basic number can be quoted at twice another price. The gap is not greed but material grade, wall thickness, inspection and batch size. The breakdown below covers the inquiry checklist and a total-cost method.

Figures here come from the charts, the basic part number index and the manuals on file. Anything without a public source is marked as per supplied documents rather than inferred.

Slurry pump parts and casing
Slurry Pump Parts Price
WHAT DRIVES THE PRICE

Why one basic number can differ twofold

Slurry pump parts are not catalogue items. The basic number says which part it is; material, wall thickness, inspection, batch size and tooling decide what it costs.

WHERE THE SAVING COMES FROM

Four usual ways a part gets cheap

Not every low price is bad, but knowing where it came from tells you whether the risk is acceptable.

PracticeWhat it looks likeWhat it does
Lower alloy content or remelt scrapSame look, same weightHardness and wear life drop, often by half
Thinner sectionsLighter, cheaperReaches the wear limit sooner, higher perforation risk
No balancing or inspectionFaster deliveryVibration and short bearing life; hidden defects surface on site
Copied from a worn partIt fitsClearance and profile偏差 shift flow and head
Compare wear parts by cost per operating hour, not per piece. Once life is included, the gap is usually wider than the price gap.
INQUIRY CHECKLIST

Send this and the quote will be usable

Miss one item and the supplier quotes the most common build, which means another round of questions later.

TOTAL COST

Turn price into cost per running hour

A simple example: a part costing 50% more but lasting twice as long cuts annual cost by a quarter.

ItemLow-price partLong-life part
Unit price3,0004,500
Service life (months)36
Parts per year42
Annual part cost12,0009,000
Stops per year42
Cost per stop按现场计Same
Figures are illustrative. Fill in your own power, labour and downtime costs.
FAQ

Slurry Pump Parts Price: common questions

Why not simply quote the lowest price?

A low price always corresponds to a trade-off in material, section thickness or inspection. Knowing the trade-off is what makes it acceptable; comparing numbers alone moves the risk to site.

Are common parts in stock?

Impellers, liners, sleeves and similar wear parts are usually held as blanks or finished stock, confirmed against model and material. Non-standard parts and special grades need production time.

Can you make parts to drawing or sample?

Yes, given a drawing or a measurable sample plus critical fits and material. Remember a worn sample is not a dimension reference for a new part.

Are rubber parts always cheaper?

No. Small rubber parts usually are, but large lined casings with steel inserts can approach metal prices. Choose on medium and life, not unit price.

How long is a quotation valid?

Normally within the month, given alloy and exchange rate movement. Frame agreements can fix an adjustment formula.

NEXT STEP

Send the model and duty; we check the part

For pumps, send medium, flow, head, density and installation. For parts, send model, frame code and basic number. We reply within one business day.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry