An unplanned stop is often caused not by a worn-through impeller but by a seized release ring, a broken bolt or a leaking stuffing box joint. These items cost little but decide whether maintenance finishes on schedule.
The practical answer is to include them in a standing spare list: count the small parts by pump and frame size and keep one or two sets, so a single missing item does not stop the whole unit.

| Part / structure | Description |
|---|---|
| Cover plate and joints | Close the chamber and connect pump head to frame |
| Stuffing box and gland | Carry the seal and match the shaft sleeve |
| Frame and end cover | Support the bearing assembly and form the oil chamber |
| Fasteners and locators | Release ring, lock nut, clamp washer and gaskets |
| Part | Function in the pump | Typical material |
|---|---|---|
| Cover Plate | The cover plate closes the suction side of the pump end, connects to the suction pipe and forms the inlet passage with the front liner. | Ductile iron or cast steel, with the suction-side inner surface protected by the front liner or volute liner. |
| Stuffing Box | The stuffing box houses packing, the lantern ring and the gland, forming the packing seal chamber and admitting seal water for cooling, lubrication and flushing. | Cast iron, cast steel or wear/corrosion-resistant alloy, with the bore matched to the shaft sleeve. |
| Gland | The gland compresses the packing to maintain moderate contact with the shaft sleeve and control leakage. A split design allows packing replacement without dismantling other parts. | Cast iron, cast steel or stainless steel, usually of split construction. |
| Bearing Frame | The bearing frame supports the bearing assembly, connects the pump end to the base and carries radial and axial loads. It is normally not a wear part. | HT250 grey iron or QT500 ductile iron. |
| Impeller Release Ring | The impeller release ring provides a bearing surface for removal, protecting impeller threads and the shaft end during on-site wear part changes. | Quenched-and-tempered steel or stainless steel with sound threads. |
| Clamp Washer | The clamp washer spreads bolt or nut clamping force, protects mating faces and helps prevent loosening. | Carbon steel, stainless steel or lock-type washers. |
Common combinations; grade choice needs medium temperature, concentration and particle size.
| Duty condition | Recommendation |
|---|---|
| Pumps with frequent maintenance | Keep one or two sets of gaskets, O-rings and fasteners |
| Corrosive environment | Stainless fasteners prevent seizing during dismantling |
| High temperature | Select gasket and O-ring material for the temperature |
| Older pumps | Check drawings and actual dimensions instead of ordering by model only |
Model pages list construction, code explanation and chart extracts.
Each part has its own page with basic number, material and matching range.

Ductile iron or cast steel, with the suction-side inner surfac…

Cast iron, cast steel or wear/corrosion-resistant alloy, with …

Cast iron, cast steel or stainless steel, usually of split con…

HT250 grey iron or QT500 ductile iron.

Quenched-and-tempered steel or stainless steel with sound thre…

Carbon steel, stainless steel or lock-type washers.
Judge by wall thickness, clearance and performance, not by months in service.
Sort by pump and frame: wetted parts, seal parts, drive parts and small items. Set stock levels for each group based on wear rate and lead time.
Fasteners and gaskets can differ between batches, so the basic part number or actual dimensions should be confirmed.
Rubber away from light and heat, metal parts protected from rust, seals stored flat and unloaded. Check rubber parts for ageing before use.
Parts are supplied by basic part number because the same name has different numbers in different frames. Send the pump model, frame code and a photo of the worn part, or the basic number directly.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.