Slurry shield and pipe-jacking systems move excavated spoil out of the tunnel continuously, so the pump must stay stable at high flow with sand and gravel present. The 300LPT-SHG is a large-bore mud pump for that duty; complete-unit and wetted-part photos are on file as a reference for component checks.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Large shield tunnelling mud circulation pump. The 300LPT-SHG is a large mud circulation pump for slurry shield tunnelling, carrying spoil-laden mud between the face and the separation plant. It is characterised by a large bore and high flow and must be matched to long pipelines and the mud treatment system.
300 relates to the bore (mm), LPT is the series code and SHG the shield mud pump type designation.
Flow, head and motor power are checked against project system data; no product performance is committed on this site.
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

Ductile iron, cast steel or wear-resistant alloy; in double-ca…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

Wear-resistant alloy, stainless or 3Cr13-type martensitic stee…

Heavy rolling bearings (cylindrical roller plus thrust/angular…
Excerpts that apply to this series; read the full text on the online reading page.
Higher flow, wider passages, a build focused on continuous reliability, and matching to the separation plant. A standard slurry pump in shield duty usually fails by blockage and vibration rather than wear.
Only unit and wetted-part photos are on file, without a public chart. Provide tunnel diameter, advance rate, slurry flow and head, and the build is confirmed per project.
Impeller, volute liner, front and back liners and seal parts are the routine wear items. Continuous boring cannot wait for parts, so stock one wetted-part set ahead of the drive schedule.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.