Shijiazhuang Zhongqian Pump Industry Co., Ltd. · Slurry pumps / Spare parts / Technical support
ZQZhongqian PumpZHONGQIAN PUMP
Home/Slurry pumps/AH Slurry Pump
SLURRY PUMP SERIES

AH Slurry PumpHeavy duty · double casing · fractional sizes

Fractional designations such as 6/4 and 8/6 are the shared language of the AH range: suction and discharge bores in inches. The series is designed for abrasive, high-density slurry as normal duty, with replaceable liners inside the casing and cover plate and frames sized by load.

Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

AH series heavy duty slurry pump
AH Series Heavy Duty Slurry Pump
CONSTRUCTION

How this series is built

Horizontal, overhung, double-casing centrifugal slurry pump. The AH series is the heavy-duty member of the fractional slurry pump family. Replaceable metal or rubber liners sit inside the casing and cover plate, wear sections are thickened and the frames carry high loads. It is used for continuous abrasive, high-concentration slurry duty and may be staged in series within its allowable working pressure.

MODELS & DESIGNATION

Reading the designation, models on file

For example 6/4D-AH: 6 is the suction bore (inch), 4 the discharge bore (inch), D the frame code and AH the heavy-duty series; a trailing R denotes rubber lining.

PERFORMANCE

Flow, head and speed coverage

Typical coverage: discharge bores about 25-450 mm, flow up to about 8600 m3/h and single-stage head up to about 68 m.

ModelMax. power kWQ m³/hH mn r/minMax. eff. %
1.5/1B-AH1512.6-28.86-681200-380040
2/1.5B-AH1532.4-726-581200-320045
3/2C-AH3039.6-86.412-641300-270055
4/3C-AH3086.4-1989-521000-220071
4/3D-AH6086.4-1989-521000-220071
6/4D-AH60162-36012-56800-155065
6/4E-AH120162-36012-56800-155065
8/6E-AH120360-82810-61500-114072
8/6R-AH300360-82810-61500-114072
10/8ST-AH560612-136811-61400-85071
12/10ST-AH560936-19807-68300-80082
14/12ST-AH5601260-277213-63300-60077
Rows are excerpted from the AH Series Pump Performance Chart chart on file. Read the full table online; selection follows the supplied documents and written confirmation.
APPLICATIONS

Typical duties

The industry pages behind these duties set out recommended series, wear parts and field checks.

MATERIALS & SEALING

Wetted materials and shaft sealing

Material follows the medium; sealing follows suction pressure and whether dilution is allowed.

SELECTION NOTES

Three checks before choosing this series

WEAR PARTS

Wear parts and basic part numbers

Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

FROM THE MANUAL

Requirements stated in the manual

Excerpts that apply to this series; read the full text on the online reading page.

FAQ

AH Slurry Pump: common questions

What is the difference between AH and AHR?

A trailing R marks rubber-lined wetted parts (for example 6/4D-AHR); without R the wetted parts are metal. Casing, frame and mounting dimensions are the same; the difference is material and the media each suits.

What do the 6 and 4 in 6/4D-AH mean?

6 is a 6 inch suction bore, 4 a 4 inch discharge bore, D is the frame code and AH the series. The fraction says nothing about flow; read the model chart for that.

How large a particle can an AH pump pass?

Use the maximum passing particle size in each model chart. When solids approach the impeller passage width, move to the wide-passage single-casing G gravel pump instead of enlarging the AH size.

NEXT STEP

Send the duty and we confirm model and material

Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.

Request a quotation

We reply within one business day. You can also call +86 188 0321 2220.

Your details are used for this inquiry only.

Model and spare part identification

Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.

Click outside or press Esc to close
☎Call✉Email⇄Inquiry