The ZGB was developed for ash and slag duty: double casing with separately replaceable liners, discharge indexable through eight positions at 45 degrees, and a trailing P for 3-4 stage series operation. The range runs from 65ZGB to 300ZGB, about 50-1800 m3/h.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Horizontal, single-stage single-suction, overhung double-casing heavy duty slurry pump. The ZGB series is a heavy duty, high-head pump developed for ash and slag handling. Its pump end, shaft seal and drive end can be serviced separately; it supports series staging and suits continuous abrasive duties such as power plant ash removal and long-distance tailings transport.
For example 200ZGB(P): 200 is the discharge bore (mm), Z stands for slurry pump, G for high head, B for the series code, and a trailing P denotes multi-stage series operation (3-4 stages).
Typical coverage: discharge bores about 65-300 mm, flow about 50-1800 m3/h and head about 50-94 m.
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

High-chrome wear alloy, rubber lining or wear/corrosion-resist…

High-chrome wear alloy or wear-resistant rubber, matched to th…

Wear-resistant alloy, stainless or 3Cr13-type martensitic stee…

Heavy rolling bearings (cylindrical roller plus thrust/angular…
Excerpts that apply to this series; read the full text on the online reading page.
Choose ZGB for ash and slag, staged duty and separately replaceable liners; choose AH for mineral slurry across a wide bore range. Both offer high-chrome wetted parts.
P marks a multi-stage series build, commonly 3-4 stages. Stage count changes casing pressure and seal water requirements, so it must be stated on the order.
It is confirmed from ash-to-water ratio and particle shape, not a single percentage. With coarse slag, check maximum particle size against impeller passage width.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.