The SP puts the wet end below the liquid surface, so no priming is needed at start-up; it suits pits, sumps, settling tanks and pond cleaning. The SPR build has rubber-lined wetted parts for fine particles and mild corrosion. Models run from 40PV-SP to 300TV-SP.
Construction, model range, wetted materials and duty limits for this series. Figures come from the charts and manuals on file; values not published are marked "per supplied documents".

Vertical, submerged, overhung centrifugal slurry pump. SP / SPR sump pumps keep the motor above the liquid while the pump end is immersed in a pit or tank. No foot valve, priming, shaft seal or seal water is required, suiting fixed submerged duties in settling ponds, sumps and flotation cells.
Typical coverage: discharge bores about 40-300 mm and head up to about 40 m.
| Model | Max. power kW | Q m³/h | H m | n r/min | Max. eff. % |
|---|---|---|---|---|---|
| 40PV-SP | 15 | 19.44-43.2 | 4.5-28.5 | 1000-2200 | 40 |
| 40PV-SPR | 15 | 17.28-39.6 | 4-26 | 1000-2200 | 40 |
| 60QV-SP | 30 | 23.4-111 | 5-29.5 | 700-1500 | 50 |
| 60QV-SPR | 30 | 22.5-105 | 5.5-30.5 | 700-1500 | 51 |
| 100RV-SP | 75 | 54-289 | 5-35 | 500-1200 | 56 |
| 100RV-SPR | 75 | 64.8-285 | 7.5-36 | 600-1200 | 62 |
| 150SV-SP | 110 | 108-479.6 | 8.5-40 | 500-1000 | 52 |
| 200SV-SP | 110 | 189-891 | 6.5-37 | 400-850 | 64 |
| 250TV-SP | 200 | 261-1089 | 7.5-33.5 | 400-750 | 60 |
| 300TV-SP | 200 | 288-1267 | 6.5-33 | 350-700 | 50 |
The industry pages behind these duties set out recommended series, wear parts and field checks.
Material follows the medium; sealing follows suction pressure and whether dilution is allowed.
Each part page lists the basic number, material options and applicable models. One basic number maps to different part numbers across frames, so check against the nameplate.

Mainly high-chrome wear alloy (A05 / Cr26 / Cr27); rubber or p…

High-chrome wear alloy, wear-resistant rubber or polyurethane:…

High-chrome wear alloy, rubber lining or wear/corrosion-resist…

Quality alloy steel or quenched-and-tempered carbon steel, wit…

Heavy rolling bearings (cylindrical roller plus thrust/angular…
Excerpts that apply to this series; read the full text on the online reading page.
Both are vertical submerged designs. SP covers a wider size range and offers the rubber-lined SPR; ZJL is a vertical single-stage sump pump with its own charts. Choose on pit depth, flow and abrasiveness.
No. The column must stay submerged; dry running destroys bearings and seals, and rubber linings fail quickly from dry friction.
Fit an agitator or jet nozzle at the wet end to bring solids into suspension before pumping. Plunging straight into the bed blocks passages and induces vibration.
Send the medium, particle size and solids content, flow, head, pH and temperature, plus installation conditions (pit depth or line length). For parts, add the pump model or a photo of the worn part.
We reply within one business day. You can also call +86 188 0321 2220.
Please provide the pump model, nameplate data and duty parameters by phone or email. Performance charts and manuals can be read online.